连续体结构的参数化水平集统一优化

针对传统分步式结构优化设计的不足,提出一种同时进行结构拓扑、形状和尺寸统一优化的设计方法.首先采用水平集函数描述统一的结构优化模型和几何尺寸边界,通过引入紧支径向插值基函数将结构拓扑优化变量、形状优化变量和尺寸优化变量变换为基函数的扩展系数;然后取该扩展系数为设计变量,借助一种参数的变化表达3种优化要素对结构性能的影响,将复杂的多变量优化问题变换为相对简单的参数优化问题,有利于与相对成熟的优化算法相结合提高求解效率;进一步用R函数将其融合为一个整体,构造出统一优化模型,并用最优化准则法进行求解.最后通过数值案例证明了该方法的有效性和精确性.     

A novel data-driven approach to support decision-making during production scale-up of assembly systems

In today's manufacturing settings, a sudden increase in the customer demand may enforce manufacturers to alter their manufacturing systems either by adding new resources or changing the layout within a restricted time frame. Without an appropriate strategy to handle this transition to higher volume, manufacturers risk losing their market competitiveness. The subjective experience-based ad-hoc procedures existing in the industrial domain are insufficient to support the transition to a higher volume, thereby necessitating a new approach where the scale-up can be realised in a timely, systematic manner. This research study aims to fulfill this gap by proposing a novel Data-Driven Scale-up Model, known as DDSM, that builds upon kinematic and Discrete-Event Simulation (DES) models. These models are further enhanced by historical production data and knowledge representation techniques. The DDSM approach identifies the near-optimal production system configurations that meet the new customer demand using an iterative design process across two distinct levels, namely the workstation and system levels. At the workstation level, a set of potential workstation configurations are identified by utilising the knowledge mapping between product, process, resource and resource attribute domains. Workstation design data of selected configurations are streamlined into a common data model that is accessed at the system level where DES software and a multi-objective Genetic Algorithm (GA) are used to support decision-making activities by identifying potential system configurations that provide optimum scale-up Key Performance Indicators (KPIs). For the optimisation study, two conflicting objectives: scale-up cost and production throughput are considered. The approach is employed in a battery module assembly pilot line that requires structural modifications to meet the surge in the demand of electric vehicle powertrains. The pilot line is located at the Warwick Manufacturing Group, University of Warwick, where the production data is captured to initiate and validate the workstation models. Conclusively, it is ascertained by experts that the approach is found useful to support the selection of suitable system configuration and design with significant savings in time, cost and effort.     

焊接构造对T型接头超低周疲劳性能的影响

为了研究焊接细节对钢结构超低周疲劳性能的影响,以T型接头为对象,在通用有限元程序Abaqus平台上,开发基于Arlequin算法的结构多尺度计算程序. 利用多尺度算法,开展焊接接头的局部弹塑性有限元分析. 比较焊趾半径、厚钢板未熔透长度及焊趾表面凹凸对局部塑性应变履历的影响,利用Coffin-Manson模型对T型接头的超低周疲劳特性进行定性讨论. 数值计算结果表明,焊趾位置是焊接接头的超低周疲劳易损位置,厚钢板的未熔透长度对焊接部位局部塑性应变的影响不大;焊趾半径对焊趾局部塑性应变有较大的影响,增大焊趾半径可以有效提升钢结构在循环荷载下的超低周疲劳性能;焊趾表面的平整性是影响焊趾局部塑性应变履历的重要因素,尖锐的凹坑会明显降低焊接接头的超低周疲劳性能,磨平的焊趾表面可以减少局部塑性应变,提高接头的超低周疲劳强度.     

等温核酸放大技术在重金属检测方面的应用

等温核酸放大技术是一种可以实现重金属污染物痕量分析的高灵敏性检测方法,在分析检测中有着广泛且重要的作用。本文综述了几种不同的等温核酸放大技术及其在重金属检测方面的应用,阐述分析了各方法的检测原理,为之后建立更加灵敏、快速、准确的检测方法提供了参考。虽然等温核酸放大技术目前主要停留在实验室阶段,并且检测目标有限,但是由于该技术的高灵敏性、特异性以及与其他学科紧密的联系性,具有潜在的应用前景。     

年最大洪峰流量群居蜘蛛优化投影寻踪预测模型

年最大洪峰流量预测,受较多的复杂因素的影响,不确定性较强,用常规统计方法做出准确预报具有较大困难。从水文序列本身出发,提出将投影回归模型应用于年最大洪峰流量预测,为了更好获得投影寻踪模型参数和预测精度,提出了运用延迟相关系数法确定回归预测因子、群居蜘蛛算法优化投影寻踪模型最佳投影方向参数a、利用最小二乘法确定多项式的权系数c、岭函数个数M的群居蜘蛛优化投影寻踪年最大洪峰流量预测模型,结合长江宜昌站(1882年-2004年)的年最大洪峰流量资料进行实例预测,训练阶段平均绝对相对误差为8.61%,预测阶段平均绝对相对误差为10.51%,该模型预测效果较好,模型结果稳定,可有效应用于年最大洪峰流量预测。     

关联量化系统参数稳定性与控制器设计

量化问题广泛存在于计算机控制系统和数字通信的传输通道中. 本文研究一类非线性关联量化系统的参数稳定性及分散状态反馈控制器的设计问题. 每个控制器的输出经过对数量化器量化后输入到子系统中,其量化密度的大小会影响系统的稳定性. 首先,设计分散状态反馈控制器,使得无量化器存在时的关联闭环系统参数稳定,并确定参数稳定的区域;然后,对每个子系统的控制输入采用对数量化器进行量化,通过局部信息确定子系统中对数量化器量化密度的下界,使得整个闭环关联量化系统在参数稳定域内仍然保持稳定;最后,对给定量化密度,优化控制器使系统能容许最大的非线性. 仿真结果表明,本文所设计的分散量化控制器在参数稳定域内能够镇定关联大系统.     

单极板微位移电容传感器结构设计与优化

根据单极板微位移电容传感器结构优化设计的问题,提出了一种基于纵横推进法的电磁场仿真参数化建模方法。在建立合理的单极板电容传感器电磁仿真参数模型基础上,首先通过仿真实验选择保护环和绝缘层缺口的最优值。然后依据仿真得到的最优值,选择结构与最优值接近的电容传感器产品对比,取得了较好的研究结果,电容仿真值与实际测量值误差小于0.3%。最后对电容传感器极板倾斜对测量结果的影响进行了研究,极板倾斜2°时测量误差为1.6%。电容传感器结构优化结果满足实际工程要求。     

二维参数化图形技术研究进展

近几年来，参数化图形技术得到了不断的发展。目前已有多种参数化图形方法及系统。这些参数化图形方法可分为３种，即变分几何法、几何推理法和过程法。主要介绍这３种方法的研究进展。     

A parametric frequency response method for non-linear time-varying systems

A new parametric frequency response algorithm is introduced to investigate linear and non-linear dynamic systems with time-varying parameters. In the new algorithm the time-varying parameters are regarded as additional inputs of the systems and the non-linear generalised frequency response functions for multi-input-single-output systems are then employed to obtain Zadeh's system functions from a differential equation representation. The parametric frequency response method reveals how the time-varying parameters affect the behaviour of the systems through a time-varying term. The new method can be applied to both linear and non-linear time-varying systems.